When moisture is torture… Leather sheds its radiance

The demand for genuine leather is typically attributed to its growing adoption in fashionable accessories like jacketsfootwear, belts wallets and luxury handbags. The handcrafted designer leather products look elegant and considered as best-selling fashionable products globally.

The finished leather items are known for long-lasting characteristic. However, the raw material used in a leather item is not long-lasting. The waste product of slaughterhouses and meat processing units is turned into shining leather products at leather tanneries.

In tanneries, in the various stages of processing/curing phase, colouring, finishing  moisture  level  has  to  be  maintained  to  prevent  microbial growth. 

Leather Sheds

Since leather is highly hygroscopic, and it tends to absorb moisture from the surrounding air during packaging, storage and shipping.

During processing, when leather is exposed to the surrounding air, the porous surface of leather makes it highly susceptible to mildew buildup in humid climates. Mould, mildew and fungi germinate when relative humidity is above 40%.

The uncontrolled humidity could cause:

  • Loss of sheen
  • Bad Smell or musty Odour
  • Spots, stains, discolouration
  • Mould and mildew growth
  • Gradual decomposition and loss of strength

Once mould and bacteria have established on the product then cleaning will only remove the visual effect but structural defects aren’t easily rectified.

Leather Storage

Finished leather products regain moisture while in storage, prior to packaging. This result in the high rate of product spoilage due to mould/ fungus/ mildew growth fueled by moisture absorbed by the leather. In order to prevent this spoilage, it is necessary to store the leather in humidity-controlled warehouses where conditions are maintained at less than 40% RH at ambient temperature. This prevents leather from regaining moisture and thus, growth of mould, mildew and fungus are reduced.

Leather Packaging

The only way to prevent fungus growth is to ensure that the leather does not regain any moisture during packaging. The best, most simple and economical method is Dehumidification. Control the humidity at less than 40% RH in the packing area. Moreover, unhygienic environments don’t provide breathing air to leather.

Leather Shipping

During shipping, temperature fluctuations due to land and sea breeze cause irreparable harm to the leather consignments. As temperature comes down, the moisture condenses over the leather goods, providing ideal condition for fungal growth on the surface of leather goods.

While there are mechanical means for removing mould from leather, the process itself is time consuming. In certain instances such as leather being shipped, delay can prove costly as the damage done is beyond repair. The best alternative is maintaining the required environmental conditions that forestall mould and mildew growth during leather storage and packaging. Leather that is stored and packed dry, stays dry.

Bry-Air Solution

A dry and well-ventilated environment prevents the incidence of leather mildew and mould growth  occurring in the first place. Installing dehumidifiers in the leather storage and packaging areas and ensuring dehumidified conditions prior to shipping will ensure fewer rejections.